MV C-Force
The C-Force is a 27.27m Damen Multicat 2712 that has been specifically designed for multipurpose roles, in diverse working environments. The multicat has a proven design which has been thoroughly tested and developed over the years.
The vessel has a bollard pull capacity of over 32.3tonne, and has 2 large cranes forward and aft plus a total of 2 winches for towing, craneage, anchor handling and tuggers.
Share this
Specifications
General
| Date Of Build | August 2021 |
| Category | MCA Cat 1 Up to 150miles (from safe haven) |
| Person on Board | 15 including Crew |
| Classification | Damen Multicat 2712 | IMO No. | 9850305 |
| Call Sign | MITT4 |
| MMSI | 232033970 |
| Flag | UK |
| Port of Registry | Kirkwall |
Features
Comfortable heated and air-conditioned accommodation for 7 persons in two double and three single cabins, galley, sanitary facilities, etc.
Tank Capabilities
| Fuel Oil | 105m3 |
| Fresh water | 31.3m3 |
| Dirty oil | 1.7m3 |
| Sewage | 10.5m3 |
| Sludge | 1.3m3 |
| Hydraulic Oil | 2.3m3 |
| Lubrication oil | 1.5m3 |
Auxiliary Equipment
| Generator Sets | 2x Cat. C 04.4 |
| Hydraulic Power | 107 kVA each, 50 Hz |
| Transfer Pump Fo/Fw | Cat C12TA, 339 kW 1800rpm |
| Fuel Oil Separator | 2x SIHI VWKA 8020 |
Performances
| Speed | 10 |
| Bollard Pull Max | 32T |
Deck Layout
| Anchor | 2x 300 kg Pool TW (HHP) (1 stored) |
| Anchor Winch | 1x Hydraulically driven, Kraaijeveld KAB-1-H-17.5D |
| Deck crane Fore | HS Marine AKC 290 LHE3 11.3 T @ 16.5 m |
| Deck crane Aft | HS Marine AKC 290 LHE3 11.3 T @ 16.5 m |
| Anchor Handling Winch Capacities |
1x single drum, Kraaijeveld, wire Ø44 x 650m 100 ton@ 3m/min pulling force 1st layer 150-ton brake holding force 1st layer |
| Towing Winch |
1x single drum, Kraaijeveld, wire Ø36 x 650m 50 ton@ 10m/min pulling force 1st layer 100-ton brake holding force 1st layer |
| Towing Pins Front | 1x WK double pin type with chain stopper |
| Towing Pins Aft | 1x WK triple pin type in line |
| Tugger winch | 4x Dromec HPV-12000 SWL 12 ton(m) @20 m/min |
Propulsion System
| Main engines | 2 x Caterpillar C323 TTA ACERT |
| Total Power | 1790 bkW at 1800 rpm |
| Gearboxes | 2x Reintjes WAF 572L 7,091 : 1 |
| Propulsion | 2x fixed pitch propellers in Optima nozzles |
| Diameter | 1900mm |
| Bow thruster | Veth VT-180 , 184kW, Hydraulic |
Main Data
| Length O.A. | 27.27 M |
| Beam O.A | 12.45 M |
| Beam Moulded | 11.5 M |
| Depth Moulded | 3.9 M |
| Draught (98% condition) | 2.65 M |
| Light Ship Weight (Approx.) | 420 T |
| Deadweight | 220 T |
| Cargo Deck Area | 150 M2 |
| Deck Load | 10T/M2 |
| Gross Tonnage | 299GT |
| British Tonnage | 178.8BT |
Nautical Equipment
- Search Lights – Seamat 2
- Radar System – 1x Furuno, FAR-1518BB
- Radar System – 1x Furuno, FAR 8065
- Compass – 1x Cassens & Plat, Reflecta 1
- Gyro Compass – 1x Anshuetz, Standard 22
- Autopilot – 1x Simrad, AP-70+
- GPS – 1x Furuno, GP-170
- Echosounder – 1x Furuno, FE-800
- Speedlog – 1x Skipper, EML-224
- AIS – 1x Furuno, FA-170
- Intercom – 1x Phonetech, CIS3000
- VHF – 2x Sailor, RT6222, with DSC
- Handheld VHF – 2x TR-20
- SBB – 1x Sailor 6310
- Inmarsat – C – 2x Sailor 6110
- Navtex – 1x Furuno, NX-700A
- Watch Alarm – 1x Furuno, BR-500
- Entertainment System – 1x Seatel ST 24
- Wind Indicator – 1x Obsermet OMC 115
- Chart Plotter – 1x Transas NS 4000
Downloads
